Main Characteristics of the PLEIADES Mission
Pleiades is the optical component of the ORFEO system developed in cooperation with Italy.
The Pleiades system is an optical observation system with a metric resolution designed to offer a high acquisition capability with a revisit lower than 24 hours to satisfy both civilian and military needs.
Moreover, to meet the needs for detailed mapping, specially in urban areas and to complement aerial photography, Pleiades will offer instantaneous stereoscopic acquisition and the capability to cover large areas.
For applications such as forestry, geology and marine environment, and using its spectral characteristics and its tridimensional characterization of surfaces, Pleiades should complete the information supplied by other sensors, such as Spot 5, by offering information with a better spatial resolution.
At last, to meet the defence and civil security missions, Pleiades system should enable to:
- Supply the information in a very short delay (typically less than 24 hours).
- Insure to the defence users a priority in the daily programming of the 50 acquisition demands.
- Insure to the defence users the confidentiality of these demands as well as the security of the communications.
- Enable the capability of prioritarian acquisitions on a predefined area with a "crisis" mode implementation.
For this, the Pleiades system is constituted of a constellation of two optical satellites (visible and near infrared domain) on a Sun-synchronous orbit at 694 km. This number of satellites is essential to guarantee the accessibility and revisit frequency required to operationally answer to defence and civil security missions.
With its two agile satellites the Pleiades system will offer:
- a daily access to every point on Earth,
- a resolution of 0.7 m in vertical viewing in panchromatic,
- four spectral bands (blue, green, red and near infrared) with a resolution of 2.8 m in vertical viewing,
- a field of view of 20 km,
- an acquisition of a 120 km x 120 km image mosaic in the same orbit,
- the acquisition of nearly instantaneous stereoscopic couples (or even triplet) of 20 km by 300 km,
- the acquisition of cloud free images covering 2 500 000 km² per year,
- a very accurate localisation of the images (<1 m with ground control points) enabling an optimal use of the data in the Geographical Information Systems (GIS).
Moreover, the great agility of the satellites will enable to minimize the programming conflicts, particularly during the dual use, and to better meet the users' needs.
The main characteristics of the Pleiades optical component are in the table below:
field of view
blue, green, red
and near infrared
with ground points
without ground points
1 m / 1000 km
< 10 m
km² by orbit (maxi)
max target number on 100 km x 200 km
30 000 km²
120 km x 120 km
20 km x 300 km
30 (crisis mode)